1kW Water Turbine, Small Axial Flow Type

● High speed, fewer blades, lower vibration, higher efficiency, removable 1kW water turbine ● Suitable for small streams, small running water, powering homes ● Small axial hydroelectric generator, easy to move, small footprint ● Water wheel generator provide clean energy and reduce environmental pollution
🚚 Free shipping
⏱️ Delivery: 6-12 days
🔙 30-day Returns

The 1kW water turbine is a hydroelectric turbine generator designed for low-flow conditions, making it suitable for small streams, rivers, and areas with minimal water flow. With an input voltage of 220V, this hydro generator is specifically crafted for domestic electricity needs. Experience the benefits of clean and renewable energy with 1kW small water turbine electric generator, bringing power to your home.

Designed with efficiency in mind, our hydro generator is perfect for individuals looking to generate renewable energy in a sustainable and environmentally friendly manner. Its compact size and compatibility with low-flow conditions make it suitable for installation in small-scale setups, providing a reliable source of power for homes.

1kW water turbine feature


  • High speed, fewer blades, lower vibration, higher efficiency, removable
  • Mainly used in places where the difference in water flow is relatively low, such as, small rivers, small dams and so on.

1kW Water Turbine Components


1kW water turbine detail

1 2 3 4
Bearing Cover Cover Bear Rotors
5 6 7 8
Stator Coil Motor Bucket Pedestals Bear
9 10 11 12
Oil Seal Trocar Water Cone Water Guide
13 14 15 16
Wheel Spring Pad Nut Cotter Pin

Schematic Diagram of Hydroelectric Generator Installation

Schematic diagram of hydroelectric generator installation
  1. Hydroelectric generator
  2. Water-conducting spiral chamber
  3. Tailpipe
  4. Drainage basin
  5. Drainage outlet
  6. Upstream horizontal line
  7. Drop in elevation
  8. Downstream level (10-20 cm above the drain)

Axial turbine generator working principle: the main use of the tailpipe to form a vacuum suction pipe, pull the suction upstream of the incoming water to make it form a jet, the impulse water blade rotation, so that the kinetic energy of the water flow is converted into mechanical energy, the water blade rotation drives the generator to rotate to send out electricity.

Power 1kW
Input Voltage 220V
Waterleaf Diameter 15cm
Water Level Difference 1.5m-3m
volume of water flow 0.03-0.04 m³/s
Camping hydro generator

Hydro Generator for Capping

Off grid hydro generator

Hydropower Turbine for Outdoor

Domestic water turbine

 Hydro Generator for Off Grid

Rural mountainous areas

Water Turbine Generator for Rural


Q1. What maintenance is required for the turbine?

  • Regular Inspection: Conduct routine visual inspections to check for any signs of wear, damage, or corrosion. Inspect the turbine blades, rotor, and supporting structures.
  • Debris Removal: Clear any debris, such as leaves, branches, or sediment, that may accumulate around the turbine. Accumulated debris can affect the turbine's performance and efficiency.

Q2. What are the key components of a 1kW water turbine?

  • Turbine Rotor: The rotor is the central component that captures the kinetic energy from the flowing water. It typically consists of blades or buckets that are designed to efficiently convert the water's energy into rotational motion.
  • Generator: The generator is responsible for converting the mechanical energy produced by the turbine rotor into electrical energy. As the rotor turns, it drives the generator, producing electricity.
  • Control System: Some water turbines are equipped with a control system that monitors and manages the turbine's operation. The control system may include sensors, actuators, and a controller to optimize performance and ensure safe operation.
0.0 0
Write your own review Close