| Rated Output Power |
6kW |
| DC Input Rated Voltage |
48V/96V (optional) |
| Peak Power |
18000VA |
| Support Starter Motor |
4HP |
| Maximum Mains Charging Current |
0~20A |
| Utility Input Voltage Range |
110V AC/120V AC/220V AC/230V AC/240V AC (same as the output voltage) |
| Utility Input Frequency Range |
50Hz/60Hz (adjustable) |
| Utility Charge Method |
Three-stage (constant current, constant voltage, float) |
| Inverter Output Efficiency |
≥85% |
| Inverter Output Voltage |
AC±2%: 110V /120V/220V/230V/240V (battery mode) (optional) |
| Inverter Output Frequency |
50Hz±0.5/60Hz±0.5 |
| Inverter Output Waveform |
Pure sine wave |
| Utility Output Efficiency |
>99% |
| Utility Output Voltage Range |
Followe input |
| Utility Output Frequency Range |
Automatic tracking |
| Inverter Output Waveform Distortion |
≤3% (linear load) |
| Battery Mode No-load Loss |
≤2.5% of rated power |
| Utility Mode No-Load Loss |
≤2% rated power (utility charger does not work) |
| Energy-saving Mode No-load Loss |
≤10W |
| Valve Regulated Lead Acid Battery |
Average charging voltage: 14.2V; Float charging voltage: 13.8V (single cell voltage) |
| Protection Battery Under Voltage Alarm |
11V (single battery voltage) |
| Battery Under Voltage Protection |
10.5V (single battery voltage) |
| Battery Over Voltage Alarm |
15V (single cell voltage) |
| Battery Over Voltage Protection |
17V (single cell voltage) |
| Battery Over Voltage Recovery Voltage |
14.5V (single cell voltage) |
| Overload Power Protection |
Automatic protection (battery mode), circuit breaker or fuse (mains mode) |
| Inverter Output Short Circuit Protection |
Automatic protection (battery mode), circuit breaker or fuse (mains mode) |
| Temperature Protection |
>90°C (output off) |
| Alarm A |
Normal operating condition, no alarm sound from buzzer. |
| Alarm B |
Battery failure, abnormal voltage, overload protection, buzzer beeps 4 times per second. |
| Alarm C |
When the machine is turned on for the first time and the machine is normal, the buzzer will beep 5 times. |
| Working Mode |
Inverter priority/utility priority/energy saving mode |
| Conversion Time |
≤4m/s |
| Panel Display |
LCD |
| Heat Sink Mode |
Intelligent fan control |
| Communication Function |
Mobile app |
| Operating Temperature |
-10℃~40℃ |
| Storage Temperature |
-15℃~60℃ |
| Noise Level |
≤55dB |
| Altitude |
2000m (over the need to reduce the amount of use) |
| Relative Humidity |
0%~95%, no condensation |
| Installation Mode |
Tower type |
| Dimension |
490*260*500mm |
(1).png "PowerHome.com")
(1).png)
