The 1000 VA/800W industrial uninterruptible power supply is a backup power supply suitable for office and commercial environments with high requirements for power continuity, effectively improving the safety and reliability of system operation. Equipped with an LCD screen, it displays real-time battery level, AC mode, battery mode, and other parameters. Single-phase pure sine wave output, 120V/240V selectable. The ups uninterrupted power supply provides stable voltage output and has overload protection, short-circuit protection, and abnormal alarm functions. It can be used for stable power supply to loads such as computers, servers, monitoring hosts, access control systems, smart home systems, and small medical instruments.
Specification
| Phase |
Single phase with ground |
| Capacity |
1000 VA/800 W |
| Input |
| Nominal Voitage |
100/110/115/120/127VAC or 200/208/220/230/240VAC |
| Input Voltage Range |
55-150VAC or 110-300 VAC (Based on load at 50%) |
| 85-140VAC or 160-280VAC (Based on load at 100%) |
| Frequency Range |
40Hz-70Hz |
| Power Factor |
≥0.99 @ Nominall voltage (100% load) |
| Output |
| Output Voltage |
100/110/115/120/127VAC or 200/208/220/230/240VAC |
| Voltage Regulation |
±1% |
| Frequency Range (Synchronized Range) |
47-53Hz or 57-63Hz |
| Frequency Range (Batt. Mode) |
50Hz±0.25Hz or 60Hz±0.3Hz |
| Current Crest Ratio |
3:1 |
| Harmonic Distortion |
≤3% THD (Linear Load) |
| ≤6% THD (Non-linear Load) |
| AC Mode to Battery Mode Transfer Time |
Zero |
| Inverter to Bypass Transfer Time |
4 ms (Typical) |
| Waveform (Batt. Mode) |
Pure Sine wave |
| Efficiency |
| AC Mode |
88% |
| Battery Mode |
83% |
| Battery Long-run Model |
| Battery Type |
Depending on the capacity of external batteries |
| Numbers |
2/3 |
| Charging Voltage |
27.4VDC±1% / 41.0VDC±1% |
| Charging Current (max.) |
1A/2A/4A/6A (Adjustable) |
| LCD Indicators |
Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators |
| Alarm |
| Battery Mode |
Sounding every 4 seconds |
| Low Battery |
Sounding every second |
| Overload |
Sounding twice every second |
| Fault |
Continuously sounding |
| Physical Long-run Model |
| Dimension, DxWxH (mm) |
282x145x220 |
| Net Weight (kgs) |
4.1 |
| Environment |
| Humidity |
20-90% RH @ 0-40°C (Non-condensing) |
| Noise Level |
Less than 50dB @ 1 Meter |
| Management |
| Smart RS-232/USB |
Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC |
| Optional SNMP |
Power management from SNMP manager and web browser |
Note:
1. The UPS input/output configuration is 1-phase (L, N, G) like Europe standard, NOT support the split phase (L1, L2 + G) like USA standard.
2. Batteries that work with this UPS are not included, customers need to match lead-acid battery packs on their own, consult us for battery specifications.
3. If you need other output voltage range, please contact us.