AC/DC Power Supplies

● The 48V PoE power supply supports 10/100Mbps network speeds. ● Stable performance and economical cost. ● The PC+ABS housing is safe and durable. ● Widely used for remote power supply and network connectivity in IP cameras, wireless APs, network bridges, access control systems, and small-scale security monitoring projects.

● PoE power injector provides charging for smart network systems. ● Compatible with most 10/100Mbps connections, supports AC100-240V input. ● Transmits power and network signals simultaneously through a single network cable, powering remote devices. ● Suitable for powering wireless access points (APs), wireless bridges, IP cameras, and outdoor CPE devices.

● Isolated PoE splitter supports 48V to 12V conversion, maximum power 15.4W ● Waterproof design, compatible with IEEE802.3-AF/AT protocol standard ● Features power failure and voltage protection, stable transmission ● Suitable for power supply of outdoor IP cameras, access control, alarm devices, information acquisition terminals, etc

● Delivers stable 5V DC / 10A / 50W for consistent device performance. ● 100% full load burn-in tested for long-term reliability. ● Fan-free natural convection cooling for quiet, maintenance-free operation. ● Ideal for LED strips, computers, printers, monitoring, and industrial control.

● 90W PoE power injector is compatible with network devices conforming to the IEEE 802.3af/at/bt. ● Supports AC 110V-240V input and DC 52V 2.88A output. ● Features automatic detection, overload protection, and short-circuit protection. ● Provides safe and reliable remote power supply while transmitting high-speed data.

● Provides continuously adjustable output voltage from 0 to 24 volt and current from 0 to 100/150/200 A. ● Supports automatic mode switching between constant voltage (CV) and constant current (CC). ● Built-in safety features include overvoltage, overheat, and short-circuit protection, suitable for lab and electronics.

● 200W constant current LED driver with dimming capability and efficiency reaching up to 92%. ● Certified by UL, CE, CCC, and FCC, with IP65/IP67 waterproof protection and three optional dimming modes. ● Features adjustable output current for easy compatibility with different LED lighting fixtures.

● Electroplating rectifier provides adjustable DC output voltage 0-48V and current up to 300A with high-precision control ≤±1%. ● Advanced IGBT inverter rectifier with PWM control supports pulse plating frequency from 1000-8000Hz for high-quality coating performance. ● Industrial plating power supply supports three-phase AC 380-480V input and air-cooling design for stable long-term operation. ● Intelligent electroplating rectifier supports RS485, PLC interface, and remote monitoring for automated electroplating systems.

● 0–30V voltage and 0–5A current are continuously adjustable, meeting the precise power supply requirements of various scenarios. ● Linear voltage regulation design, with ripple noise as low as 0.5mV, excellent load and line regulation performance. ● Excellent load/line regulation rate, stable temperature coefficient, and reliable long-term operation accuracy. ● A variety of voltage inputs are available, suitable for power grid environments in different regions around the world.

● The PoE power splitter provides a stable DC power output to terminal devices. ● Supports the IEEE 802.3af/at PoE standard and is suitable for various low-power network devices. ● Uses pure copper wire, offering excellent conductivity to ensure stable network signal transmission. ● Supports 12/36 or 45/78 power supply modes, providing reliable power for network cameras, wireless bridges, access control systems, and other devices, widely used in security monitoring and network equipment power supply scenarios.

● Features a steady 5V/20A/100W output to provide dependable power for your equipment. ● Free air convection cooling provides reliable heat dissipation without noise. ● Rigorous 100% full load burn-in test guarantees reliable long-term operation. ● Low cost and high reliability make it an economical and trustworthy solution.

● Variable regulated DC power supply supports continuous adjustment of output voltage from 0–30 volt and output current from 0–5 amp or 0–10 amp. ● Combines a 4-digit digital display and continuously adjustable output to provide ultra-low ripple and low noise, resulting in a clean and stable power supply. ● Built with over-voltage, over-current and short-circuit protection, and designed for constant voltage with current limiting.

● 240 watt dimmable constant current LED driver with efficiency of up to 92.5%. ● UL, CE, CCC, and FCC standards, with IP65/IP67 waterproof rating and 3 dimming options. ● Suitable for applications including plant grow lights, street lights, stadium lights, fish-attracting lights, and therapeutic lighting.

● Adopts a low-ripple linear topology, providing pure and stable power supply for precision electronic testing. ● Equipped with multiple safety protections such as overcurrent and overvoltage, which is efficient and reliable. ● The efficiency is greater than 65%, the recovery time is ≤100μs, and it can operate stably for a long time. ● A variety of input voltages are available, adapting to the power grid environments in different regions of the world.

● Gigabit PoE splitter supports 48V to 5V, ensuring stable network signal transmission ● Built-in circuit isolation protection to prevent voltage fluctuations ● Maximum current output 2.4A, compliant with IEEE 802.3-AF/AT standards ● Provides power and data output for IP network cameras, wireless access points (APs), routers, mini network switches, IoT devices, etc.

● The electroplating rectifier features three-phase 380-480V input with 0–100A continuously adjustable output and DC voltage options up to 48V. ● IGBT 15kHz PWM technology with ≥92% efficiency, power factor ≥0.9, and ≤1% voltage/current stability. ● Supports RS485, PLC 0–10V and 4–20mA interfaces for remote monitoring, control, and start/stop operation. ● Integrated protection against overcurrent, overvoltage, overheating, short circuit, phase loss, and diode faults for safe industrial use.

● Supplies steady 5V 30A (150W) power to ensure continuous, reliable operation for all connected equipment. ● Quiet free air convection cooling maintains optimal operating temperatures without moving parts. ● 100% full load burn-in testing ensures consistent performance and long service life. ● Complies with strict EMC standards for stable, interference-free operation.

● Digital adjustable DC power supply is continuously adjustable within the range of 0 to 30 volt output voltage and 0-20A/30A output current. ● Provides overvoltage protection, overtemperature protection, output lockout, surge protection, and a 4-digit LED voltage and current display. ● Suitable for experimental current testing, aging tests, electronic repair, and DIY projects.

● Electroplating rectifier with IGBT PWM control provides DC 0-48V and 0-1000A adjustable output with ≤±1% stability. ● Pulse plating rectifier supports one-way and two-way pulse output with adjustable frequency 1000–8000Hz. ● Industrial plating power supply supports three-phase AC 380-480V input with efficiency ≥92% and power factor ≥0.9. ● Supports RS485, PLC 0-10V, and 4-20mA interfaces for remote control and automated electroplating systems.

● 12V 2.1A SMPS supports full-range 110V/220V AC input for global compatibility. ● Pure copper transformer ensures low loss, high efficiency, and stable power output. ● Built-in overload, overvoltage, and short-circuit protection guarantees safe operation. ● Widely applicable to industrial equipment, LED lighting, and security monitoring systems.