Voltage Regulation & Protection

● 3HP/2.2 kW/7A line reactor offers wide 220V–480V voltage compatibility for global systems. ● Class H enameled wire ensures stable performance under high thermal loads. ● 1.5x rated current overload safeguards against transient load spikes and surges. ● Vacuum impregnation and epoxy casting deliver superior moisture resistance, vibration damping, and heat dissipation.

● Linear phase-shifting temperature and voltage control, supporting multi-signal/mode switching, suitable for 380V three-phase industrial scenarios. ● Built-in quick-acting fuses, combined with anti-overheating and anti-short-circuit terminals, ensuring safety and reliability. ● High-airflow fans optimize heat dissipation, ensuring durability and long service life, significantly extending the lifespan of components. ● Multi-functional LED provides real-time status feedback.

● 4 kW (5 hp) DC reactor, rated current 15A, low energy consumption. ● Single-phase structure, made of copper/aluminum. ● Voltage 220V/380V/400V can be optional. ● Used for current limiting, reducing DC ripple, and suppressing DC harmonics.

● A broad frequency range of 0.5 to 6 GHz. ● Low insertion loss and excellent isolation for minimal signal degradation and reduced interference between ports. ● Precision engineered with robust SMA-Female connectors. ● Compact and lightweight aluminum housing.

● Intelligent WiFi remote control allows centralized management from a computer. ● 16 independent outlets with 2000W per channel, support simultaneous operation of multiple devices. ● Built-in dual protection against short circuits and overcurrent ensures safety, while phosphor copper sockets guarantee durability. ● Features a large LCD for real-time voltage monitoring and supports RS232/RJ45 port expansion.

● 3 kVA single-phase, full automatic relay-type stabilizer for home use ● Wide input voltage range 140V to 260V with stable 220V/230V output ● Advanced CPU control technology for high reliability and low waveform distortion ● Features output delay protection and a lightweight, compact design

● 3kVA variac variable transformer, industrial AC voltage regulator. ● Supports both 50Hz and 60Hz working frequencies. ● Input voltage selectable between 110V and 220V. ● Protective metal shell construction enhances durability and dissipates heat efficiently. ● Designed for high efficiency, long operational life, and excellent electrical conductivity.

● Design with 7A rated current, supporting 1.5x overload for 60s and 50/60Hz operation. ● With optional copper/aluminum windings for flexible, cost-effective VFD compatibility. ● High-quality Class F/H insulation and premium materials guarantee durable, consistent performance in harsh industrial environments.

● Features a robust 30 kVA servo motor for precise and responsive voltage correction. ● Default configuration handles a wide three-phase input range of 304V-456V AC (±20%) with a stable 380V output. ● Both input and output voltage parameters can be factory-customized to meet specific regional or equipment requirements. ● Automatically and continuously adjusts to stabilize output voltage amidst supply fluctuations or changing load conditions. ● Integrated safeguards include over-voltage, under-voltage, overload, overheat, and short circuit protection. ● Equipped with an LCD and menu navigation buttons for easy monitoring, setting adjustments, and status checks.

● Supports 3 phase 4-wire 380VAC input, with multiple current specifications available. ● Built-in dual control modes of phase and zero-crossing, meeting the needs of industrial electricity usage in various scenarios. ● Compatible with constant impedance, variable impedance loads, and infrared lamps. ● Equipped with a fan for efficient heat dissipation, ensuring long-term stable operation.

● 7.5hp DC reactor for VFD, rated current of 15A, IP00 protection rating. ● Voltage 220V/380V/400V customizable, resistance 2.125mH. ● Single-phase structure, copper/aluminum material optional. ● Suppresses current ripple, reduces harmonics, and limits inrush current.

● High-frequency 2-way coaxial power divider for 18–40 GHz signal splitting. ● Compact design with 2.92mm-Female connectors. ● Excellent amplitude and phase balance ensures consistent signal integrity for communications and GPS. ● Withstands operating temperatures from -45 ℃ to +85 ℃.

● 10 hp Single-phase DC reactor for inverter, copper/aluminum material optional ● Rated current 20A, 220V, 380V, 400V voltage can be customized ● Effectively smooths current and suppresses harmonics ● A solution for improving system stability in motor drives, fans, pumps, automated production lines, etc

● Provides manual sequential control over 16 outlets, powering devices on and off in a 1-second interval. ● Offers manual override buttons for direct system control. ● Built with comprehensive protection, including safeguards against overload, over-current, over-voltage, and short-circuit. ● Delivers robust power handling with a total system capacity of 6KVA.

● With 10A rated current, supporting wide voltage options and 50Hz/60Hz global power grids. ● Compact, lightweight design for long-lasting reliability in harsh industrial environments. ● Effectively suppresses harmonic interference, extends the service life of your devices. ● Delivering cost-effective power protection for pumps, fans, conveyors and industrial automation systems.

● 380V thyristor power regulator offers rated current options ranging from 75A to 250A. ● Supports 4-20mA/0-5V/0-10V, compatible with mainstream automation systems. ● Built-in cooling fan, dual protection against overcurrent and overtemperature. ● Linear phase-shifting for precise temperature control, offering high cost performance for the whole machine.

● Delivers a substantial 40 kVA capacity, providing robust voltage support for multiple critical systems or high-demand machinery. ● Features a full-automatic compensated servo motor system for real-time, precise voltage correction without waveform distortion. ● Offers user-selectable output accuracy of ±1% for ultra-sensitive equipment or ±2-4% for standard industrial applications. ● Default configuration supports a wide three-phase, four-line input range (Phase: 175V-265V / Line: 304V-456V) with a stable 380V output, adaptable to diverse grid conditions.

●5000VA single-phase relay control stabilizer with LED display ● Wide dual-range input: 95-125V/190-250V AC to stable 110V/220V output ● High efficiency design with automatic restart & intelligent time-delay system ● Comprehensive protection with high/low voltage cut-off for home appliances

● Substantial 5000VA rated capacity with 16A rated output current. ● Built with all-copper coils throughout. ● Specifically configured for 220V rated input voltage and 50Hz working frequency. ● Ideal for regulating output from standby generators, providing stable, adjustable AC to connected equipment. ● Maximizes electrical conductivity, minimizes energy losses, and ensures cooler operation under sustained 5kVA continuous load.

● 3-way RF power divider operates from 0.5 to 6 GHz. ● Uses low-loss microstrip technology for reliable RF/microwave performance. ● Functions as both a power splitter and combiner for system versatility. ● Handles up to 20W (splitter) and features a surface-mount design.